Appraisers Laser
Disto Laser Distance Meters, Smarttool Digital Levels, and Digital Angle Finders. Wide range of Products for the apprasial industry.
- Last build:
- Language:
- Feed URL:
- http://www.appraiserslaser.com/basefeed.php
RSS FEED IDEMS: Appraisers Laser
- Gemred - 24in. Digital Level With Laser and Free Case
Free Carrying Case! Description: Full 360 Degree Level with the accuracy to a tenth of a degree. Durability to acomodate the toughest working conditions. Ever used a Carpenters Level, but just wished it had the Digital Accuracy. For years optical survey equipment was only accuate to minutes, now with digital they are accuracte to the second. This level will give that to you anywhere you go with just the level and 2 AAA batteries. Also included in this model is a laser. Use this feature to transfer points on both a horizontal plane or vertical. Plumb lasers cost up to a couple hundred dollars. At this price you can have a digital carpenters level and a plumb laser. Product Includes: 24in. Digital Level 2 x AAA Batteries Manual 24in. Carrying Case (While Supplies Last) Feature: 360 degree working range Extra large LCD with Back-Lit Display Audio Indication will sound at: 0° - 45° - 90° increments Hold Button: freezes any reading and can be converted from one mode to another Display always reads upright, no matter which way the level is turned 15 minute auto shut off Always Accurate: can be re-calibrated at the touch of a button Both top surface and bottom surface have been machined for used on both sides Built-in acrylic bubble vials Laser Output with Horizontal Line, Horizontal/Vertial Line or just Spot Referance Specifications: Range: 4×90°(0-360°) Work temperature: 41F to 104F Work humidity: =85%RH Resolution: 0.1° Accuracy: 0° and 90° = 0.1° the rest = 0.2° Power: 2 x AAA alkaline batteries Applications: Roofs Stair rails Decks Floors Framing Excavating Road Grades Slope Checks Concrete Work and Forms Safty Checks - Wheel Chair Ramps, Steps and Walk Ways Warranty: 30 Days - Johnson - Model 40-6065 Digital Laser Level and Angle Locator
Johnson - Model 40-6065 Digital Laser Level and Angle Locator FEATURES: Displays angle and inclination simultaneously Working range of angle measurement is 0 to 182.5 degrees Automatic digit inversion for overhead measurements INCLUDES: Digital laser level and angle finder 3 "AA" alkaline batteries Instruction Manual Soft-sided carrying case TECHNICAL SPECIFICATIONS: Laser Wavelength 650nm±10nm Laser Classification Class IIIa Maximum Power Output ≤5mW Laser Accuracy ±1/8"/50ft. (±0.2mm/m) Accuracy ±0.1° for 0° and 90° ±0.2° for 1° to 89° Resolution 0.1° or 0.1% Working Angle Inclination 0° - 90° or 0% - 100% Working Range Angle 0° - 180° Accuracy Angle ±0.1° Power Supply 3 "AA" alkaline batteries (included) Battery Life Approximately 70 hours continuous use Dimensions 20.8" x 2.48" x 1.57" (528 x 63 x 40mm) Weight 2.6 lbs. (1.18 kg) Working Temperature 14°F to 113°F (-10°C to +45°C) Center Screw Thread 1/4"-20 - MD - 24 in. Digital Level Rail - Digital Carpenters Level
Description: 24in. Heavy Duty Aluminum I-Beam Level with High Impact Vials. Ment for the Large and Small jobs of all types. All metal design makes clean up easy. Each level accepts the Smarttool Electronic Module. The Smarttool Electronic Module attaches to the 24in Rail by just unscrewing the smarttool module and inserting it into the middle of the Rail. Features: Heaviest gauge I-beam. Impact resistant vials and vial covers for durability and long life. Endcaps help protect tool against drops and shocks. Fixed cials are hand set to each working edge. Ideal for the carpenter of contractor who wants affordable quality. 24in. Carpenters Level that Accepts the Smarttool Module. Warranty: Lifetime - MD - 24 in. Smart Tool - Smart Level - Digital Carpenters Level
The Smart Tool is based around an electronic module which can display angle over a full 360° range with a resolution of 0.1°. It is available as either a stand alone module or as a 60cm or 120cm long levelling tool. The module can be used as supplied, or it can be panel mounted into your product or equipment. The SmartTool levels can be used in a variety of applications as both a conventional level and as an angle setting or measuring tool. Controls include: ON/OFF - automatic shut-off if left idle for 6 minutes HOLD - freeze or unfreeze display readings LISTEN & LEVEL AUDIO - beeper will sound at level and plumb CALIBRATE - simple two-step calibration procedure (recommended once per day) Deg.,%,IN/FT - select display units UP/DOWN ARROWS - show direction of tilt to reach level or plumb LOW BATTERY - low 9V battery indicator Product Includes: 24in. Digital Level - Smarttool Operation Manual 9-V Battery Smart Tool enables you to find level and plumb in two ways. For quick reference, use the sensitive acrylic bubbles. For high precision, use the digital display with amazing accuracy within 1/10 of a degree. If you're not dealing with plumb or level, Smart Tool quickly identifies any angle in 3 different modes: degrees, % slope and pitch. Preview a short movie about the Smart Tool Smarttool Calibration Info About M-D Building Products SmartTool Welcome to the versatile world of SmartTool. Most levels only give you information at level (0 degrees) and plumb (90 degrees) using bubbles you have to work to center visually between two lines. You can do that with SmartTool, too, but the SmartTool also lets you measure digitally, electronically, and with an actual number, at every angle, all 360 degrees of a complete circle. So installing a deck, stair rail, extending a roof or determining how much an old floor has sagged is simpler, less time consuming, and more accurate. SmartTool is simple to use. Just press the on/off button and SmartTool will show you the angle of any surface with decimal-point accuracy. The display even flips over with the level so SmartTool always reads right side up And it shuts off automatically after 6 minutes when it's not being used, all this from a standard, 9-volt battery. And, SmartTool can take abuse other levels can't, because its components are made of high strength materials and you can reset it to factory accuracy with the touch of a button. Many versatile options If you can imagine times you'd like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need. The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D's top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement. Simple to use SmartTool permits you to find level and plumb in two ways. For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module. It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't. So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be. And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run). Read in Degrees Set saw blade angles to a fraction of degree accuracy with SmartTool. Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel. Percent Slope and Pitch In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings -- in inches of rise per foot of run -- right on the display. No two-handed measurements, no conversion calculations, and no mistakes. Listen and Level Audio Feature Have tasks where you really can't see the SmartTool but need instant feedback? Then turn on the audio beeper. When turned on with a single button, SmartTool lets you hear when your task is at level or plumb. This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it. Hold The hold button makes it easy to measure in areas where the digital display is not visible. Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading. From the Manufacturer SmartTool electronic level all ready to go in a 2 ft. long aluminum frame. Only SmartTool electronic level can measure all angles in a 360 degree range. Installing a deck, stair rail, extending a roof, or determining how much an old floor has sagged is simpler and less time consuming. The display even flips over with the level, and it shuts off automatically after 5 minutes when it is not being used, all this from a standard, 9-volt battery (not included). Features: angle accuracy to 1/10 of a degree, the mode button lets you see angles in three ways-degrees, percent slope or pitch (inches of rise per foot of run), and Listen & Level ideal for poorly lit areas. Also allows hands-free operation as the audible tone alerts you when tool reaches level or plumb. Please note that the module cannot be removed from the rail. - MD - 48 in. Digital Level Rail - Digital Carpenters Level
Description: 48in. Heavy Duty Aluminum I-Beam Level with High Impact Vials. Ment for the Large and Small jobs of all types. All metal design makes clean up easy. Each level accepts the Smarttool Electronic Module. The Smarttool Electronic Module attaches to the 48in Rail by just unscrewing the smarttool module and inserting it into the middle of the Rail. Features: Heaviest gauge I-beam. Impact resistant vials and vial covers for durability and long life. Endcaps help protect tool against drops and shocks. Fixed cials are hand set to each working edge. Ideal for the carpenter of contractor who wants affordable quality. 24in. Carpenters Level that Accepts the Smarttool Module. Warranty: Lifetime - MD - 48 in. Smart Tool - Smart Level - Digital Carpenters Level
The Smart Tool is based around an electronic module which can display angle over a full 360° range with a resolution of 0.1°. It is available as either a stand alone module or as a 60cm or 120cm long levelling tool. The module can be used as supplied, or it can be panel mounted into your product or equipment. The SmartTool levels can be used in a variety of applications as both a conventional level and as an angle setting or measuring tool. Controls include: ON/OFF - automatic shut-off if left idle for 6 minutes HOLD - freeze or unfreeze display readings LISTEN & LEVEL AUDIO - beeper will sound at level and plumb CALIBRATE - simple two-step calibration procedure (recommended once per day) Deg.,%,IN/FT - select display units UP/DOWN ARROWS - show direction of tilt to reach level or plumb LOW BATTERY - low 9V battery indicator Product Includes: 48in. Digital Level - Smarttool Operation Manual 9-V Battery Smart Tool enables you to find level and plumb in two ways. For quick reference, use the sensitive acrylic bubbles. For high precision, use the digital display with amazing accuracy within 1/10 of a degree. If you're not dealing with plumb or level, Smart Tool quickly identifies any angle in 3 different modes: degrees, % slope and pitch. Preview a short movie about the Smart Tool Smarttool Calibration Info About M-D Building Products SmartToolWelcome to the versatile world of SmartTool. Most levels only give you information at level (0 degrees) and plumb (90 degrees) using bubbles you have to work to center visually between two lines. You can do that with SmartTool, too, but the SmartTool also lets you measure digitally, electronically, and with an actual number, at every angle, all 360 degrees of a complete circle. So installing a deck, stair rail, extending a roof or determining how much an old floor has sagged is simpler, less time consuming, and more accurate. SmartTool is simple to use. Just press the on/off button and SmartTool will show you the angle of any surface with decimal-point accuracy. The display even flips over with the level so SmartTool always reads right side up And it shuts off automatically after 6 minutes when it's not being used, all this from a standard, 9-volt battery. And, SmartTool can take abuse other levels can't, because its components are made of high strength materials and you can reset it to factory accuracy with the touch of a button. Many versatile options If you can imagine times you'd like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need. The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D's top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement. Simple to use SmartTool permits you to find level and plumb in two ways. For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module. It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't. So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be. And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run). Read in Degrees Set saw blade angles to a fraction of degree accuracy with SmartTool. Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel. Percent Slope and Pitch In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings -- in inches of rise per foot of run -- right on the display. No two-handed measurements, no conversion calculations, and no mistakes. Listen and Level Audio Feature Have tasks where you really can't see the SmartTool but need instant feedback? Then turn on the audio beeper. When turned on with a single button, SmartTool lets you hear when your task is at level or plumb. This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it. Hold The hold button makes it easy to measure in areas where the digital display is not visible. Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading. From the Manufacturer SmartTool electronic level all ready to go in a 2 ft. long aluminum frame. Only SmartTool electronic level can measure all angles in a 360 degree range. Installing a deck, stair rail, extending a roof, or determining how much an old floor has sagged is simpler and less time consuming. The display even flips over with the level, and it shuts off automatically after 5 minutes when it is not being used, all this from a standard, 9-volt battery (not included). Features: angle accuracy to 1/10 of a degree, the mode button lets you see angles in three ways-degrees, percent slope or pitch (inches of rise per foot of run), and Listen & Level ideal for poorly lit areas. Also allows hands-free operation as the audible tone alerts you when tool reaches level or plumb. Please note that the module cannot be removed from the rail. - MD - 24 in. Digital Level Carrying Case (Soft)
Description: Heavy Duty Padded Carrying Case for any 24 in. Level. Adjustable shoulder strap makes carrying any 24 in. level as easy as throwing it over your shoulder. Features: Fits all 24 in. Levels Heavy Duty Padded Case Adjustable Shoulder Strap 24 in. Digital Level Carrying Case Warranty: 30 Day Limited - MD - 48 in. Digital Level Carrying Case (Soft)
Description: Heavy Duty Padded Carrying Case for any 48 in. Level. Adjustable shoulder strap makes carrying any 48 in. level as easy as throwing it over your shoulder. Features: Fits all 48 in. Levels Heavy Duty Padded Case Adjustable Shoulder Strap 48 in. Digital Level Carrying Case Warranty: 30 Day Limited - MD - 48in. Carpenters Level Hard Case
Descripton: Heavy duty moled plastic case for all 48 in. carpenters levels. Flip top opening with a clean fit for all 48 in. levels. Features: Heavy Duty Hard Plastic Case Flip Top Fits all 48 in. Levels Warranty: 30 Days - MD - Smarttool Module Magnetic Bracket
The SmartTool digital level is a durable field tool that can be used as a level, plumb and clinometer. It digitally displays angles in degrees, percent slope and pitch (inches of rise or fall per linear foot) to an accuracy of 1/10 degree. Controls include: ON/OFF - automatic shut-off if left idle for 6 minutes HOLD - freeze or unfreeze display readings LISTEN & LEVEL AUDIO - beeper will sound at level and plumb CALIBRATE - simple two-step calibration procedure (recommended once per day) Deg.,%,IN/FT - select display units UP/DOWN ARROWS - show direction of tilt to reach level or plumb LOW BATTERY - low 9V battery indicator Dimensions are 6" x 1 1/2" x 2". Weight 7 1/2 oz. Housed in environmentally sealed polycarbonate housing. 9 volt battery provides up to 120 hours of continuous use. Smart Tool enables you to find level and plumb in two ways. For quick reference, use the sensitive acrylic bubbles. For high precision, use the digital display with amazing accuracy within 1/10 of a degree. If you're not dealing with plumb or level, Smart Tool quickly identifies any angle in 3 different modes: degrees, % slope and pitch. Preview a short movie about the Smart Tool Smarttool Calibration Info About M-D Building Products SmartTool Welcome to the versatile world of SmartTool. Most levels only give you information at level (0 degrees) and plumb (90 degrees) using bubbles you have to work to center visually between two lines. You can do that with SmartTool, too, but the SmartTool also lets you measure digitally, electronically, and with an actual number, at every angle, all 360 degrees of a complete circle. So installing a deck, stair rail, extending a roof or determining how much an old floor has sagged is simpler, less time consuming, and more accurate. SmartTool is simple to use. Just press the on/off button and SmartTool will show you the angle of any surface with decimal-point accuracy. The display even flips over with the level so SmartTool always reads right side up And it shuts off automatically after 6 minutes when it's not being used, all this from a standard, 9-volt battery. And, SmartTool can take abuse other levels can't, because its components are made of high strength materials and you can reset it to factory accuracy with the touch of a button. Many versatile options If you can imagine times you'd like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need. The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D's top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement. Simple to use SmartTool permits you to find level and plumb in two ways. For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module. It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't. So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be. And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run). Read in Degrees Set saw blade angles to a fraction of degree accuracy with SmartTool. Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel. Percent Slope and Pitch In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings -- in inches of rise per foot of run -- right on the display. No two-handed measurements, no conversion calculations, and no mistakes. Listen and Level Audio Feature Have tasks where you really can't see the SmartTool but need instant feedback? Then turn on the audio beeper. When turned on with a single button, SmartTool lets you hear when your task is at level or plumb. This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it. Hold The hold button makes it easy to measure in areas where the digital display is not visible. Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading. From the Manufacturer SmartTool electronic level all ready to go in a 2 ft. long aluminum frame. Only SmartTool electronic level can measure all angles in a 360 degree range. Installing a deck, stair rail, extending a roof, or determining how much an old floor has sagged is simpler and less time consuming. The display even flips over with the level, and it shuts off automatically after 5 minutes when it is not being used, all this from a standard, 9-volt battery (not included). Features: angle accuracy to 1/10 of a degree, the mode button lets you see angles in three ways-degrees, percent slope or pitch (inches of rise per foot of run), and Listen & Level ideal for poorly lit areas. Also allows hands-free operation as the audible tone alerts you when tool reaches level or plumb. Please note that the module cannot be removed from the rail. - Gemred - Bevel Box 180 Degree Angle Sensor
Description: Bevel box is a innovative tool that provides digital reading between +/-150.00 degree. Extra LCD is convenient to read. It is real easy to be carried and used for its small and light. Measuring plane containing disk magnet material can stick to the surface to be measured. It is especially easy to measure bevel angle of miter saw, examine and repair the automobile and so on.. Features: 1. Measuring range:+/-180.0o 2. Conversion between absolute mesurement and Relative mesurement 3. Hold function to freeze measurements 4. Automatic shut off after 5 minutes 5. In horizontal measuring mode,the accuracy is more higher with the highly accuracy level bubble 6. easy to calibrate with highly accuracy level bubble 7. Compact structure, easy to expand the measuring range by combining with other tool Specifications: 1. Resolution : 0.1 o 2. Accuracy of level bubble : 2' 3. Accuracy : 0.1o 4. Work temperature : +5oC¡«+45oC 5. Working current : <100A 6. Power : 3V CR2032 Lithium battery 7. Dimension : 2 inch *2.5 inch*1.3 inch Operation Manual - Download Miter Saw and Table Saw Operation Manual - Download - Gemred - Bevel Box 180 Degree Angle Sensor - With Machine Vial
Description: Bevel box is a innovative tool that provides digital reading between +/-150.00 degree. Extra LCD is convenient to read. It is real easy to be carried and used for its small and light. Measuring plane containing disk magnet material can stick to the surface to be measured. It is especially easy to measure bevel angle of miter saw, examine and repair the automobile and so on.. Features: 1. Measuring range:+/-180.0o 2. Conversion between absolute mesurement and Relative mesurement 3. Hold function to freeze measurements 4. Automatic shut off after 5 minutes 5. In horizontal measuring mode,the accuracy is more higher with the highly accuracy level bubble 6. easy to calibrate with highly accuracy level bubble 7. Compact structure, easy to expand the measuring range by combining with other tool Specifications: 1. Resolution : 0.1 o 2. Accuracy of level bubble : 2' 3. Accuracy : 0.1o 4. Work temperature : +5oC¡«+45oC 5. Working current : <100A 6. Power : 3V CR2032 Lithium battery 7. Dimension : 2 inch *2.5 inch*1.3 inch Operation Manual - Download Miter Saw and Table Saw Operation Manual - Download - Gemred - Digital Protractor - Angle Sensor
Description: The Pro 360 Digital Protractor is a revolutionary measuring tool that has a .1 degree accuracy at 0 and 90 degrees and .2 degrees between 1 and 89 degrees. The machined stainless steel frame with with integral base-plate is light, rigid and ultra-precise platform allowing the state of the art sensor and microprocessor circuit to provide unsurpassed accuracy throughout the protractors 360 degree range. Feature: 1. 360 degree measure range 2. Display always read upright, no matter which way the level is turned 3. Precision machined stainless frame 4. Simple calibration requiring no special fixtures 5. Versatile measuring tool, angle finder. protractor. lever three in one. 6. 3V lithium battery 2000 hours in continuous use. Tech Data: 1. Range: 4*90o(0~360o) 2. Work temperature: +5oC~+40oC 3. Work humidity: <=85%RH 4. Resolution: 0.1o 5. Accuracy: 0o and 90o<=0.1o the rest<=0.2o 6. Power: CR2032 3V lithium battery 7. Dimensions: 6 x 2.25 x 1.25 Inches Instruction Manual - Download - Johnson - Model 40-6060 Electronic Level Inclinometer
Johnson - Model 40-6060 Electronic Level Inclinometer FEATURES: Displays angle and inclination simultaneously Working range of angle measurement 4 x 90 degrees 0 and 90 degree position of inclination is confirmed by audible tone INCLUDES: Electronic level inclinometer 3 "AAA" alkaline batteries Instruction Manual Soft-sided carrying case TECHNICAL SPECIFICATIONS: Accuracy ±0.1° for 0° and 90°, ±0.2° for 1° to 89° Working Range 4 x 90° Resolution ±0.1° or 0.1% Power Supply 3 "AAA" alkaline batteries Battery Life Approximately 100 hours continuous use Dimensions 6.14" x 2.2" x 1.22" (156 x 56 x 31mm) Weight 0.66 lbs. (0.3 kg) Working Temperature 14°F to 113°F (-10°C to +45°C) - Johnson - Model 40-6080 Electronic Level Inclinometer with Rotating Display
Johnson - Model 40-6080 Electronic Level Inclinometer with Rotating Display FEATURES: Switchable between angle and grade LCD can rotate up to 180 degrees Self-calibrated at 0 and 90 degree points INCLUDES: Electronic level inclinometer with rotating display 3 "AAA" alkaline batteries Instruction Manual Soft-sided carrying case TECHNICAL SPECIFICATIONS: Laser Wavelength 650nm±10nm Laser Classification Class IIIa Maximum Power Output ≤5mW Laser Accuracy ±1/8"/50ft. (±0.2mm/m) Resolution 0.1° or 0.1% Working Range 0° to 360° continuous, displayed as 0.0° to 90.0° Power Supply 3 "AAA" alkaline batteries (included) Battery Life Approximately 70 hours continuous use Dimensions 9.8" x 1.18" x 2.17" (250 x 30 x 55mm) Weight 1.23 lbs. (0.56 kg) Working Temperature 14°F to 113°F (-10°C to +45°C) Center Screw Thread 1/4"-20
